Wednesday , May 8th 2024
    Best new deals on House of Robot Platform

ICStation Simple Robot Chassis Soldering Kit Practice Line Following Tracking Smart Car Electronic DIY Assemble Kit for Student Science STEM Learning Project

ICStation Simple Robot Chassis Soldering Kit Practice Line Following Tracking Smart Car Electronic DIY Assemble Kit for Student Science STEM Learning Project

ICStation Simple Robot Chassis Soldering Kit Practice Line Following Tracking Smart Car Electronic DIY Assemble Kit for Student Science STEM Learning Projectthumb 1 ICStation Simple Robot Chassis Soldering Kit Practice Line Following Tracking Smart Car Electronic DIY Assemble Kit for Student Science STEM Learning Projectthumb 2 ICStation Simple Robot Chassis Soldering Kit Practice Line Following Tracking Smart Car Electronic DIY Assemble Kit for Student Science STEM Learning Projectthumb 3 ICStation Simple Robot Chassis Soldering Kit Practice Line Following Tracking Smart Car Electronic DIY Assemble Kit for Student Science STEM Learning Projectthumb 4
Availability: In Stock

Product Features:

    ICStation tracking robot car is widely used in school robotics and electronics education competitions, you can have a lot of fun and learning putting this robotics kit together and understanding the theory behind the way the Light Dependent Resistors detect the difference between the black of the line and…
Price as on: 2020-03-04 14:46:46
8.99  

Product Description

ICStation tracking robot car is widely used in school robotics and electronics education competitions, you can have a lot of fun and learning putting this robotics kit together and understanding the theory behind the way the Light Dependent Resistors detect the difference between the black of the line and the white of the area outside the line, if you’re helping a youngster put this kit together you can instruct them in reading the resistor codes or using a multimeter to identify the ratings of the resistors so placement on the PCB is correct.
Please pay attention to the patterns on PCB, the resistances with different color rings, the polarities of capacitances, LEDs, and the mini gap on the chip, you will find the right placements. When finish assemble them, please practice to seal components to each bonding pads with own solder wires.

Installation Steps:
(1) Install metal film resistor, DIP-8P IC socket, Self-Locking switch, Potentiometer, S8550, Electrolytic capacitor, 5mm Red LED on PCB according to mark on PCB. Notice please: Pay attention to the direction of IC Socket. In addition to facilitate debugging, don’t install IC LM393 temporarily.
(2) PCB placed in front. The support bolts of the caster are inserted into the hole, tighten the nuts screwed into the caster, and finally fit the caster and tighten.
(3) Install photoresistor and white LED on PCB reverse. But please make sure the distance is about 5mm between top of mecanum wheel (top of screw cap top) and photoresistor/ LED.
(4) Install 2pcs DC motors.
(5) Install battery case and wheel
(6) Test:
(6.1) Install your 2pcs AA battery.
(6.2) Press on switch. If 2pcs white LED ON, the installation is successful. If LED off, please check the welding. Pay attention to the direction of LED and other component and check pseudo Soldering.
(6.3) Power on. Check S8550 or 10ohm resistor if motor don’t move.
(6.4) Install LM393 (Pay attention to the direction of IC).

Product Features

  • 【Educational Toy Kit】A scholastic tracking robot building educational toy kit for students/kids above 12 to have intellectual development, hands-on ability, IQ building and interactive skills.
  • 【Soldering Practice Kit】ICStation robot car is widely used in school electronics learning project. Electronic-lovers and beginners can learn about basic knowledge of soldering simple circuits, photoelectric sensor, motor driving, infrared sensor, C51 MCU and so on from this kit.
  • 【Learn While Playing】Learn puzzle and physics circuit knowledge while playing. Student can design an interesting and winding route with a 1.5-2.0 cm black electrical tape on a flat ground to look at the robot car running. Perfect for parents playing with kids to have fun and meaningful family time.
  • 【Principle】Smart tracking car is running based on the principle of the light reflectivity difference. The photoresistance on the board will detect the Red LED light that reflected by the ground to judge if it is following the black line.
  • 【PDF Instruction】We provide PDF instructon at [Technical Specification] section on this page. Students/kids should do the assembly under the guidance of teachers/parents. All parts are provided in one package for kids/students to assembly DIY to have a sense of accomplishment.

Related Products